The role of the three-in-one feeder splitting device
|时间：2019-06-09 08:43:07 来源： 作者：|
Punching press in the production process, the stamping materials often have a lot of dust, dirt and other conditions during transportation, storage or use, and the stamping materials are fed into the coiling equipment and transported to the three-in-one leveling machine. Ping, these processes will produce small debris, dust and other garbage, so we often clean after stamping production for a period of time, cleaning the inside of the equipment, so that the equipment can play its high performance, and the leveling head is designed to open The structure is used to replace the traditional bolt fastening. It is not necessary to use the tool to perform the splitting action of the leveling head, and the dust cleaning or debris can be quickly completed in a short time, and the material can be leveled accurately for a long time. And extend the use accuracy and life of the leveling mechanism, reducing the use and maintenance costs of the three-in-one feeder.
The splitting device of the three-in-one feeder leveling head is located on the two side walls of the feeding end of the upper drum set bracket, and is composed of an active rod, a hook rod, a buckle block, a lever, a connecting rod link, an elastic connecting rod and a straight line. Power unit composition. Wherein, one end of the active rod is pivotally connected to a predetermined position of the side wall of the upper drum set bracket, and the other end extends through the movable groove of the predetermined width of the support base to connect the linear power unit to move. One end of the hooking rod is pivoted at a predetermined position on the side wall of the upper drum set bracket, and the other end is connected with a hook to be operatively fastened to the bottom surface of the fastening block fixed on the side wall of the lower drum set bracket at a predetermined angle obliquely to the discharge end. Beveled. The lever is pivoted at a predetermined position of the support, and one end is pivotally connected to the through hole at one end of the elastic link. The other end of the connecting rod is pivotally connected to the predetermined position of the active rod, and the other end of the elastic connecting rod is disposed with a long hole pivoting the predetermined position of the connecting rod, and a tension spring is arranged on the elastic connecting rod between the hooking rod and the lever. The elastic connecting rod long hole is often pushed up and the inner side surface and the hooking rod are pivotally connected. The control constitutes the connection of each moving component, and the control of each component is timely and appropriate.
When the three-in-one feeder is used, the linear actuator of the leveling mechanism is in the retracted position, and the bottom surface of the active rod is pressed against the bottom surface of the movable groove, so that the upper roller group bracket is lowered and attached to the lower roller group bracket, The upper end of the long hole of the segment link pushes the lever, and the outer side of the long hole of the movable elastic link moves the hook and the buckle, and the elastic buckle of the hook is hooked into the buckled bevel of the buckle block to fix the upper roller set The front of the roller set is closed.
After using for a period of time, when the flattening mechanism is to be cleaned, the two linear power units are operated to push up the pivoting active lever, so that the lower edge of the long hole of the linkage connecting rod pulls up the lever, and the elastic connecting rod long hole The inner side pulls the hook rod, and the moving hook is separated from the buckle block to engage the slope. When the hook is completely separated from the buckled bevel, the top surface of the active rod is ascending to the top of the top support, and the top of the movable bracket is raised, and the upper drum set is lifted by the linkage group as a pivot point, and the rollers are exposed for cleaning.